This module supports a maximum of 8 slave devices per RS-485 network and 1.3 ms/K of typical scan rate for Boolean logic. The memory protection switch can be used to clear severe faults when these occur. The features of the module include 9K words of memory, 256 words of register memory, RAM with capacitor backup, and it supports up to 4 expansion units. The IC200UDR001 PLC module uses 100 Volts AC to 240 Volts AC of nominal input power to operate. The outputs can control 5 to 30 Volts DC or 5 to 250 Volts AC rated output devices. It comes with 8 DC inputs and 6 normally open relay outputs. The IC200UDR001 PLC module is a Versamax 14-point micro PLC module manufactured by GE Fanuc.

It has an input voltage rating of 24 Volts DC, a typical input current rating of 7.5 milliamps, an input resistance of 2.8 kiloohms, and a configurable response time of 0.5 to 20 milliseconds. The IC200UDR001 PLC module also comes with an expansion connector located on the top. This unit has relay outputs which are configurable as counter outputs, but the outputs of this PLC module are not configurable as pulse train outputs or PWM outputs. It has a 24 Volts DC power supply for the DC input circuits as well as the input devices.

It has counters that can detect the rapid pulse signals at a frequency of up to 10 kilohertz to serve a variety of industrial applications, including process control and flow meter applications. The GE Fanuc IC200UDR001 PLC module can be set to provide integral high-speed counter operation as well as pulse operation. The IC200UDR001 PLC module supports up to 8 slave devices for every RS-485 network at maximum with a typical scan rate of 1.3 ms/K for the Boolean logic. It also features a memory protection switch that can be used for clearing severe faults. Other notable features of this module include a memory capacity of 9K words, a register memory capacity of 256 words, support for up to 4 expansion units, and a RAM that has capacitor backup.

This PLC module operates on a nominal input power range of 100 to 240 Volts AC. These outputs control devices with output voltage ratings of 5 to 250 Volts AC or 5 to 30 Volts DC. This unit is a 14-point micro PLC module that comes with 8 DC inputs and 6 normally open (NO) relay outputs. The GE Fanuc IC200UDR001 module is a PLC module and it belongs to the Versamax product line.

Ge fanuc versamax software download